Custom sizes - Heavy Duty Floating Shelf Bracket – Hidden Steel Support for 2”+ Thick Shelves

Heavy Duty Floating Shelf Bracket – Hidden Steel Support for Solid Wood Shelves | Custom Sizes Available

Floating Shelf Bracket made with Heavy Duty thick gauge post and Flat Steel Backing Plate

These come in pairs.

A true structural support designed for real weight — not decorative hardware. These brackets are built to disappear inside the shelf while carrying serious load without flex or sag.

At a glance:

• Backing Plate – 3/16" thick - sizing by selection.
• Rod Material – 7/8" heavy wall mandrel drawn tube
• Rod Length – Based on selected size
• Mounting – Stud mount required.
• Install Type – Hidden / floating (drilled shelf required)

Designed for:

• Solid wood shelves (1.5"–3" thick recommended)
• Kitchens, benches, mantels, and storage
• Clean floating shelf designs with no visible hardware

Custom Options Available:

These are fully fabricated in-house and can be customized:

• Rod length
• Plate size
• Hole placement
• Heavier duty builds for increased load

If you’re unsure what you need, send a message — I’ll spec it properly for your build.

Installation Notes:

• Must be mounted into studs or solid backing
• Shelf must be drilled to match rod diameter and depth
• Tight fit is recommended for maximum strength

These are not decorative brackets — they are structural supports designed to carry real weight without sag.

Excellent for either commercial use or for your home.
For exterior use, a protective coating is recommended.

Note: Dimensions listed refer to bracket size. Ensure compatibility with your shelf before ordering.