BULK 20 PACK Floating Shelf Bracket (10 pairs, 20 pieces) - New high strength 1/2" version with backside post.

$352.74

Shipping to United States: $23.74



BUY IN BULK AND SAVE AT LEAST 20% OFF OF REGULAR PRICE! Perfect for contractors.

Available in sizes from 5" to 12" with 2 different back-side post length options.

Measurements:

Backing Plate: 1-1/2" x 2" x 3/16" Steel, two drilled holes for #10 screws
Post: 1/2" diameter cold-rolled solid round

Included: 20 pieces / 10 pairs of brackets in your chosen size.

Load shown in 3rd photograph is a 60lbs chunk of iron (lathe chuck) hanging out at the end of a 9" + 3-1/2" backside bracket

Perfect for those who have the perfect shelf material already, and don't want to use traditional brackets.

Simply recess the back side of the floating shelf for the bracket, and drill a 1/2" hole with a commonly available drill bit, bolt the brackets up and slide the wood shelf on. Easy Peasy Lemon Squeezy.

As shown in the photos, the basic install process is easy: choose your post length (1/2 of the depth of your shelf, rounded up, plus 10- 20%, also rounded up. For example a 10" shelf: 1/2 of 10 = 5". 10-20% of 10 = 1-2" you'd need a 6-7 inch bracket. Then choose the back side post length: either 2" or 3-1/2". Use the shorter one for installation onto 2x4 reinforced stud walls (2x4 blocking installed between atuds, with the wide wide oriented vertically) or the 3-1/4" variation for regular 2x4 or larger stud walls.

Carefully measure the install locations, drill 1/2" holes into the studs and place your brackets with good quality screws. Then, carefully measure the post locations, and transfer the measurement to your shelf. Drill the shelf to suit using a 1/2" bit, and ream the hole to get a good fit onto the brackets. Install and done. In higher traffic installs (kitchen shelves for example) install a toe screw on both ends of the floating shelf tieing it to the wall securely if pulled on.

These are tested to failure, and I would say they have a comfortable working load of 100lbs per pair if installed correctly. As these are a DIY product, no warranty can be offered, the load limit of your installation is highly dependent on your install.

Install one per stud, or ever 16" onto blocking. Use quality screws to fasten brackets. A tight fit into the backing (stud or blocking) is needed for correct function, loose holes have reduced weight capacity and will also allow for deflection.

Not for use in steel studs.

If you are not sure, consult a professional for installation assistance.

These come in pairs.

If you need help engineering a solution for something larger and heavier, I'm you're guy! Drop me a line! We recently designed a solution to mount a 7' 12x6" beam as a mantle, and it turned out great!

** They come unfinished. **

They are more expensive than the regular style due to the more intensive machining/welding process. If you don't need the extra strength, I'd recommend you just use the regular ones.

Payments

We accept PayPal and credit cards directly through Etsy.
Coupon codes do not stack, and they cannot be used on custom orders.

Shipping from Canada

On average, orders require 1-3 week lead time. During peak times, this may be as long as 5 weeks. We strive to keep lead times to a minimum.

If there is a discrepancy in projected ship date, only a direct question is considered valid answer. Etsy numbers are guidelines/suggestions only.

We ship within Canada and to USA using Canada Post Expedited Parcel service. You can generally expect delivery within 4-7 business days after shipment. The time required for customs clearance, however, is unpredictable.

Large items (such as tables) are not available outside Greater Vancouver, BC, Canada.

We are not responsible for damaged, late, lost or stolen parcels. If the parcel is insured, we will cooperate with the claims process. To be clear: we are not responsible. We will not refund or resend until the insurance claim has concluded and the payment has cleared.

We cannot be held responsible for incorrect addressing information.

Returns & Exchanges

I gladly accept cancellations

Reviews (1)

Average:

This is the second time I’ve bought these floating shelf brackets. Chris at Valiant Custom Works makes a consistent high quality product. He went out of his way to get them to me so I could install them for a client this week. I’m a carpenter and these are the best brackets I’ve seen.


Legal imprint